ROOFS

Special solution for wall and roof constructions  working together.

Technical specifications:

Roof element height up to 395  mm, Width 45 mm

U-value 

300 mm U = 0.11  W / m2K

370 mm  U = 0.09  W / m2K

395mm U = 0.084 W / m2K

The step of installing the rafters is 600mm. If desired, roof panels can be made,  with insulation. In this case, it is necessary to install a glulam support on top of the roof

VIEWING  

U = 0.09  W / m2K

Viilkatus pooninguga tuulekastita mahuline
Viilkatus pooninguga tuulekastita mahuline

press to zoom
1/1

FLAT ROOF

The slope is 10 ° and less

PS300_katuse solm-Temp0046
PS300_katuse solm-Temp0046

press to zoom
Lame katuse fermid-Temp0094
Lame katuse fermid-Temp0094

press to zoom
Lame katus
Lame katus

press to zoom
1/3

WITH ATTACHMENT  ROOF

1.5 korrust_Mahuline-Temp0090
1.5 korrust_Mahuline-Temp0090

press to zoom
1/1

 A flat roof can be made  in three different ways: with reinforced concrete, with classic trusses and with wooden-metal beams.  

Economic indicators

  J ärjestame  by cost: 

1. Classic wood farm

2. Roof ceiling made of wood-metal beams

3. Iron tone panel / RB casting  

A special solution in which the roof and floor constructions work together.

 

Technical specifications:

Roof element height up to 395mm,  Width 45 mm

U-value 

300 mm U = 0.11  W / m2K

370 mm  U = 0.09  W / m2K

395mm U = 0.084 W / m2K

The step of installing the rafters is 600mm. Insulation can be performed   with bulk wool or insulation boards during the production process.